Sense G1

This slideshow requires JavaScript.

SENSE G1 upgraded version  192KHz/32bit USB DAC headphone amplifier integrated machine decoder

Decoding 32bit pcm5102 decoder chip, many foreign crew were using this chip, USB input part of the upgrade is asynchronous 192KHz / 32bit receiver chip CM6631A, to facilitate access to other digital devices , increase fiber and coaxial digital inputs, retained line input and output analog signals, so can also be used as a G1 decoder or pre-amp use.

Technical parameters:
Amplifier Type: Class A Hybrid, Tube(preamp) + VMOS  (power Field Effect Transistor chip)
Output power: >500mW
Frequency response: 20Hz-35KHz
Headphone Impedance: 32ohm – 300ohm
SNR: > 90dB
USB Input: CM6631A
DAC: PCM5102
Coaxial input: COAX
Optical input: OPT
Line Input: RCA
Headphone Output: 6.35mm stereo jack
Dimensions: 165mm * 125mm * 72mm (excluding protrusions)
Support System: Win XP, Win 2003, Vista, Win7 32/64 bit, Mac OS X  Android
Weight: 1KG

Input voltage: AC110-240V 50-60Hz for entire world customer
Output voltage: DC24V 2000mA
Weight: 0.36kg

Component selection:
Machine all use imported brand capacitors,
Domestic 1% metal film resistors rings,
In order to ensure the overall quality of the G1,
Fever in key parts of high quality components:
Dedicated volume control using original ALPS volume potentiometer,
Direct thermal duct with Beijing’s 2P2J (changeable with 1S4 /3S4 / DL92 / CV820 / 2P2 / 2N2N).
SENSE G1 headphone amp is all aluminum casing.
Internal circuit modular design,
The main PCB is used for power and  power amplification section,
another piece of PCB for input, processing and USB DAC part.

SENSE G1 using:
G1 applicable sources: CD, MD, MP3, MP4, ipod, mobile phones, tablet PCs, digital players, computers
can be made in Win XP / Vista / Win 7, Mac OS X, Android and other systems use,
before using the USB input needed install the driver, installed in the computer equipment manager audio directory display:
USB SENSE Audio represents the drive is installed correctly.
USB OTG needed answering a cell phone data cable or adapter, the system requires Android 4.3 or more

First use time:
G1 new machine’s sounds is a little tight,
You can take 3 days for RUN-IN, Continuous work not stop for 8 hours each day,
But Not recommended all 24 hours use ,
In addition:
Each boot lamps require 5-20 minute warm-up time.

SENSE G1 Packing List:
a) G1 amp hosts (including tubes)
b) Power adapter (Power cable excluded)