Miu Audio MKUP-2 – Tube Amplifier with Phono

MKUP2 Phono1

Tube integrated amplifier with Phono preamplifier. The tube preamplifier section is completely separate from the power amplifier section, Phono preamplifier MM—1 input Line and 1 input Phono. Chassis slightly bigger then MKTP2

  • TPA3106D2 Class D Amp
  • 25wpc + 25wpc @ 4 Ohms, 18wpc + 18wpc @ 6 Ohms,  • 12wpc + 12wpc @ 8 Ohms.
  • Front panel jacks for headphones and iPod/iPhoneMP3 inputs, input to line level input.l Selector Line/Phono.
  • Rear panel connections for LINE input, PHONO input and speaker outputs
  • High power allows for use with a wide variety of quality loudspeakers
  • Spectacular audio performance!
  • Very compact in size – only 75mm x 70mm x 110mm.


Specification of the Power Amplifier Unit:
Output Power 2x25W @4ohm 2x12W @8ohm(RMS)
Signal-to-Noise Ratio (SNR) 98dB
Dynamic Range 98dB
THD+Noise Audiophile Quality 0.03% @ 9W 4Ohm
0.15% @ 8W 4Ohm
0.11% @ 6W 8Ohm
High Power 10% @ 15W 4Ohm 10% @ 10W 4Ohm
Input Audio IN RCA (Left/Right) x 1
Power Socket 2.1mm x 1
Speaker OUT Banana socket x4
Other Volume & Knob Power ON/OFF switch x
Power Indicator (Blue LED) x1
Power Supply DC 12V-13.2V (max.)

Specification of the Headphone Amplifier Unit:
Signal-to-Noise Ratio (SNR) 92dB
Power Output 600m Watts per channel on 32 Ohm Headphone
Frequency response 15 Hz – 100 kHz -1db
Input Impedance 10k Ohms
Input Audio CD IN RCA (Left/Right) x 1 [3Vpp max.]

Specification of the MM Phono Unit:
Sensitivity 0.35mV for 350mV Output at1KHz
Input 47k Ohm

Specification of the Pre Amplifier Unit:
Vacuum Tube 6DJ8/6922 series or 12AU7 series (exchangeable)
Signal-to-Noise Ratio (SNR) 92dB
THD + Noise 0.05% @ 10k ohm 0.15% @ 33 ohm
Input Audio CD IN RCA (Left/Right) x 1 [3Vpp max.]
Output Audio OUT 3.5mm x 1
Headphone OUT (3.5mm) x 1
Knob Audio and power switch x 1
Power Indicator (Blue LED under Tube Socket) x1
Volume Knob x 1
Power Supply DC 12V-13V (max.)

Specification of the AC Adaptor:
AC Input Universal AC 100V-240V/50-60Hz
DC Output DC 12V 5A (60W)
DC Plug DC 2.1mm
Ripple & Noise <= 25mV
Over-load Protection 105%-150%
Over-voltage Protection 115%-150%
Dimensions (L)78mm x (W)50mm x (H)33mm

Leave Your Comment

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s