High Performance Amplifiers at Affordable Price
AIBBC HF-2050 (3rd Generation) – Balanced Amplifier
AIBBC HF-2050 is a class AB amplifier and now currently is the 3rd generation with few major improvement. , using the tube taste MOSFET power tube design, four large capacitor storage for the main filter design to ensure bass dive deep, pragmatic, powerful; Overall three sound dimension, clear and transparent, solid and steady, sweet and charm. It has a Balanced connection, probably is hard to find a balanced amplifier below 500 range as balanced connection usually found in high end equipments.
Premium Edition: the input signal by new Japan Radio JRC hifi Dual OP AMP MUSES8820 offering finest sound to audio fans more widely, MUSES8820 inherit the sound signature of flagship MUSES02 , in term to pursuit high quality sound with a fraction of lower cost is most suitable for high-end audio equipment. Signal amplification driven by two BB flagship op amp OPA627AU with high resolution and excellent dynamic bass, smooth mid, vocal delicate.
- High Power: 130-160 watts X2 (4Ω), 80-90watts X2 (8Ω)
- Pre-amp circuit with power supply completely independent, adjust and optimize the parameters of the parts, remove overheat resistor. This help the amplifier to produce low heat, better stability, better sound quality, treble more balanced. The Pre-amp connection can connect to an active subwoofer to provide more bass to your music.
- Relay using Japan’s OMRON which is excellent quality, stability and enhance the reliability of the machine
- Volume potentiometer using Japanese RK16 ALPS double potentiometer, help to make the key components to become more reliable.
- Balanced 1/RCA2/RCA3 three analog audio signal input.
- Balanced input upgrade to independent power supply, audio + / – input differential signal, making the audio signal restore to be more delicate, resulting to reproduce the high resolution and analysis, the BB opa2228pa balanced input and bottom with low noise, sound quality is more delicate, more sweet.
- Op-amp decoupling capacitor all independent regulated power supply, will decouple the affected op-amp that affect the sound quality, Loopback capacitor upgrade using Nichicon Muse Series – the flagship KZ Series, Nichicon KZ series high frequency capacitance which has a gorgeous and charming mid, good low which is sweet and delicate. The op amp input decoupling of Japan ‘s Top Chemical AVF audio capacitors which is small in size and using high quality oxygen-free copper pins. Crisp and clear high-frequency , low dive with good speed and big sound stage , very different from the traditional Japanese capacitors sound. Op amp input decoupling using Elna silmic2 matte version hi-fi audio capacitors, silmic2 very natural, the highest quality audio capacitors (third harmonic distortion) SILMIC improved version. This series not only natural in characteristics, the low is thick, the mid and high suffer from less distortion. Very ideal coupling and decoupling capacitor. The sound quality effect maximum signal coupling transmission after repeated testing comparison, we promise to ensure the stability of the power amplifier performance, the final choice of straight lotus root method, resulting in the widening of frequency response, high – low more excellent, sound more transparent nature. Optimize pre-amp circuit and with tuning, use high quality audio capacitor, resulting great improves in the sounding, circuit optimization to maximize
Popularity – 🙂 🙂
Ideal for driving bookshelf speakers, the Topping PA3 is a compact power amplifier equipped with ST’s class-D TDA7498E amp chip. It delivers 80 watts per channel at a 4-ohm load—enough to drive 10-inch speakers—and has a curved, screwless front panel design that looks sleek in any setup. Two LEDs indicate the input status, while an MCU monitors issues like overload, overheating, overvoltage, and low voltage. On the rear panel, you’ll find two RCA inputs, which allow you to connect two devices at a time and easily switch between them on the front panel. Additional components include an ALPS potentiometer, EPCOS film capacitors, a Nichicon hi-fi capacitor, and an OMRON relay.
- Using Tripath TK2050
- 30W*2 output power
- Supply 2 way RCA input
Popularity – 🙂 🙂 🙂
GEK GA-98 (to replace SMSL 98E)
GEK’s GA-98 use a Swiss STMicroelectronics Ltd. (STMicroelectronics) of TDA7498E core. TDA7498E is a class D audio amplifier chip BTL output circuit. The circuit and design is similar to SMSL 98E with except it has addition pre op amp inside.
All using high quality components to create the best quality performance, use EPCOS, PHILIPS, TOCOS, Panasonic, DALE, ALPS, WIMA, ELNA ‘s high fever accessories and components, it’s high quality exquisite HIFI digital amplifier
TDA7498E power is 160WX2 (power supply = DC36V maximum measured) power is very powerful. Can push dual 8-inch big box no pressure
2X OPA2604 (not available in SMSL 98E) – It is designed specifically for audio -specific op amp , sound mellow, Thick and smooth. It has neutral warm which is known as the operational amplifier that has a tube sound.
Good in low frequency control , Soundstage and separation as well
Currently available in Black / Silver
Popularity – 🙂
- TI Class D TPA3123 chip
- 2 x 50W output power
- Texas NE5532 Ops preamp
- Using high performance hi fi grade capacitors PHILIPS, ELNA, nichicon, EPCOS, DALE etc
Selling at $85
Currently available in Black / Silver
You will be stun by how powerful this little amp can surprise you in term of warmness and detail.
- TDA7498E Class D T Amp
- 2*160W big power output amp
Selling at (no Stock)
Currently available in Black / Silver / Gold
Popularity – 🙂 🙂 🙂
Miu Audio MKP-1 – Mini Power Amp
Very Powerful Stereo power amplifier. To be used by connecting it to good quality speakers whose efficiency is at least 86/88 db. Perfect match with the mini Pre-Amp the like of Racoon SG-300 / Miu tech MKTP-1
- TA2024 Tripath Class T Amp
- 2 x 15W output power
- Dimensions 67mm x 27mm x 118mm (very mini in size)
- High performance audio performance
Selling at (No Stock)