Phono Pre-amplifers

High Performance Phono Pre-Amplifiers at Affordable Price

—————————————————————————————————————————–

Tube Phono Pre-amp

Musical Paradise MP-P2 Tube Phono Preamp

A high quality phono preamp is essential to extract the enormous sonic information in vinyl records. To achieve this goal, we spent extensive amount of time on research and development, testing, fine tuning to final assembly. We received many feedback from MP-P1 users during past 2 years and spent lots of time to design the MP-P1 successor. We are glad to announce the amazing MP-P2 tube phono preamp is ready for order.
There are many kinds of phono preamps in the market, but most of them employ low cost integrated operational amplifier (OPAMP). They are based on feedback loop circuit which does not sound quite natural or musical. To design a most natural analog sounding phono preamp, we employ NXP JFET transistor modules, 12AX7 & 6922 signal tubes and 6X5 rectifier tubes. MP-P2 also uses single ended Class A, zero global negative feedback hybrid circuit for amplification and passive RIAA network for equalization.
It presents a smooth midrange, huge sound stage, excellent high and low frequencies extensions, natural, detailed and musical sonic performance to the audience. You will be amazed that MP-P2 can reveal super fine details in vinyl records.

Here are some highlights about it:
1. Passive RIAA network and zero global negative feedback design to provide extremely natural and musical listening experience.
2. Adjustable input and ouput gain control. Plenty of gain to support super low output MC cardtridge.
3. Fully mono blocks design to provide the best channel isolation performance.
4. Tube rectification supports 6X5, 5U4G, GZ34, 274B, 5AR4 rectifier tubes.
5. Four 12AX7 tubes and two 6922 tubes for the MM amplification section.
6. Jfet module is employed for the MC to MM step-up section. This module is user changable to support other JFET transistors.
7. US military grade Dale resistors; high grade Rybycon, Nichicon, Panasonic, ELNA capacitors.
8. Obligato Gold coupling capacitors. Screw-in design for easy caps rolling.
9. Dual high power toroidal transformers.
10. Both high voltage and filament supply are DC regulated to minimize noise.
11. Gold plated PCB.
12. Gold Plated connectors.

Selling at  $1350

————————————————————

Musical Paradise MP-P1 Tube Phono Preamp

MP-P1_a

Canadian Musical Paradise we spent extensive amount of time on research and development, testing, fine tuning to final assembly. We are glad to announce that the amazing MP-P1 tube phono preamp is ready for order.

There are many kinds of phono preamps in the market, but most of them employ low cost integrated operational amplifier (OPAMP). They are based on feedback loop circuit which does not sound quite natural or musical. To design a most natural analog sounding phono preamp, we employ high quality Toshiba Audio JFET transistors and 12AX7 vacuum tubes, and use single ended Class A, zero negative feedback hybrid circuit for amplification and passive RIAA network for equalization.

It presents a thicker and warmer midrange, huge sound stage, excellent high and low frequencies extensions, natural and musical sonic performance to the audience.

Here are some highlights about it:
1. Passive RIAA network and zero global negative feedback design to provide extremely natural and musical listening experience.
2. Four 12AX7 tubes running at Class A mode for the MM amplification section.
3. Toshiba 2SK170 HiFi Jfet is employed for the MC to MM step-up section.
4. MC section can be optionally powered by external 12-24V battery supply (sold separately).
5. US military grade Dale resistors; high grade Rybycon, Nichicon, Panasonic capacitors.
6. Obligato Gold coupling capacitors.
7. Z11/M6 high grade EI transformer and chokes.
8. Gold plated PCB.
9. Gold Plated connectors.

Selling at  $750

Popularity – 🙂 🙂

Review Here

Optional purchase

MP-U2 Linear Battery Pack For MP-P1

Designed for MC to MM step-up section of MP-P1 phono preamp to provide a more clean sounding.

Selling at  $150

—————————————————————————–

Solid State Phono Pre-amp

Tisbury Domino Phono Preamplifier (made in UK)

The Domino is a versatile, high performance phono preamplifier. Selectable gain settings and input loading allow any MM or MC cartridge to be used. Ultra high-spec components along with our laser engraved walnut and aluminium enclosure achieve high-end sound and build quality but without the price tag.

Any Cartridge, Any Amp
Domino has four switchable gain settings: 40, 49, 58 and 67 dB. This allows virtually all cartridge, from high output MM to low output MC, to work with any amp. Particularly handy if you’re also using our Mini Passive Preamp, as you won’t have to worry about system matching.

Passive RIAA Equalisation
RIAA equalisation is achieved with a passive filter located between two separate gain stages. This configuration gives the best of all worlds: low noise, high accuracy, and exceptional sonic performance. 0.1% thin film resistors and 1% polypropylene film capacitors result in an exceptional 0.2 dB RIAA accuracy.

Linear Power Supply with Off Board Transformer
Domino’s power supply uses an off board 15 V AC transformer (not to be mistaken for a switch mode DC adaptor, it won’t work with DC) keeping electrical noise away from the sensitive gain stages. This gives hi-fi grade, linear regulated power rails in a small package, without having to worry about hum or ground loops.

Handmade in England
Our products are designed, made, and tested in our London workshop for true British quality hi-fi.

Selling at  $299

Popularity –

————————————————

Miu- Audio MKAU-1

MKAU-1 mini Phono PreAmp

MKAU-1 mini Phono PreAmp

MKAU-1 is one of the world’s smallest and most beautiful MM/MC phono preamplifier!
Only 65mm x 25mm x 98mm. Very mini in size.

Front panel selector for MM or MC (When pressed, MC is selected / When released, MM is selected),and rear panel connections for PHONO and LINE outputs. Ideal for high-performance turntables. Prefers amplification of high quality

Selling at  $150

Come in Black / Silver

Popularity – 🙂 🙂

—————————————————————————–

Miu Audio MKUP-2 – Hybrid 6922 Tube Amplifier 2*25W with MM Phono (New Arrival)

MKUP2 Phono1

Spectacular audio performance which give warm sweet, silky sound throughout the mid and high frequencies. Do not be deceive by the look of this little tube amp. You will not believe it is SO SO POWERFUL that will Blown You AwayEasily can drive speaker the like of Dynaudio which has 86DB and Fun to play!

Tube integrated amplifier with Phono preamplifier. The tube preamplifier section is completely separate from the power amplifier section, Phono preamplifier MM—1 input Line and 1 input Phono. Chassis slightly bigger then MKTP2

  • TPA3106D2 Class D Amp
  • 25wpc + 25wpc @ 4 Ohms, 18wpc + 18wpc @ 6 Ohms,  • 12wpc + 12wpc @ 8 Ohms.
  • Front panel jacks for headphones and iPod/iPhoneMP3 inputs, input to line level input.l Selector Line/Phono.
  • Rear panel connections for LINE input, PHONO input and speaker outputs
  • High power allows for use with a wide variety of quality loudspeakers
  • Spectacular audio performance!
  • Very compact in size – only 75mm x 70mm x 110mm.

*Supports two major tube series:
(1) 6DJ8, 6922, 6N11, 6H23n, ECC88, E88CC, etc., and
(2) 12AU7, 5963, 5814, ECC82, etc

Selling at $399

Currently available in Orange

Popularity – 🙂

Leave Your Comment

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s