Cones/Spikes/Bases

Isolation Spikes/Bases/Cones/Footers to help to improve the sound


Spikes / Bases/ Footers
Shock spikes works is very simple, that is by reducing the contact area increases the pressure speaker equipment, which suppressed the vibration generated by the instant end jump, stable direct wave. And on the equipment itself give shock absorption and attenuation; for external vibrations give blocked. To achieve these two materials, shock absorbers used nail must have high quality, high hardness, high vibration attenuation rate characteristics.

Although high-quality steel with a characteristic high quality, high hardness, but the lack of high attenuation. In this regard, we can put a material having high attenuation characteristics in combination with the steel so as to obtain the “three high” characteristics. After a series of screening material, we finalize the selection of high quality SUS304 stainless steel and graphite polymer composition. And through the use of materials ratio of debugging, finally completed this spikes.
The nail’s voice feature is very thick sense of density, while maintaining the sense of low volume, high frequency greatly improves the sense of line and texture, but ends expand wider, three-band equalizer; in large dynamic has excellent control, and the sound field with open, rich finish, as if the music has injected vitality, flew alive! This promotion is more important than the absolute change of signal lines or power lines.


Spike and Base

Ebony mini White (Spikes & Bases)

miniwhite_1 miniwhite_4

There is a significant improvement with the upgrade ebony kit, to ensure it add enough music taste and make the music playback more appealing ! Turning a CDP to be like a LP sounding and make an ordinary piano like a grand piano sounding ! As compare to the like of Japan Tilgon and some other more establish international products, the pricing is significant much cheaper.

Use for small/mini – medium size audio equipment like Amplifier, DAC, Speakers, Stand, Hifi rack etc. Can support up to 200kg of weight. Stainless Steel material

Base    (Diameter 23.5mm,  Thickness 6.5mm)
Spike – (Diameter 23.5mm,  Thickness 11mm) (Come with 3M tape)

Bundle Set A (3 pcs set) – Selling at $40/set
Bundle Set B (4 pcs set – Selling at $50/set

———————————————————

Black Gorilla 1 – Spikes & Bases

1 spike_a 1 spike_g  sticker

Use for medium size audio equipment like Amplifier, DAC, Speakers, Stand, Hifi rack etc Can support up to 200kg of weight. Stainless Steel and Black Stone Material

Base –  Selling at $8/pcs     (Diameter 39mm,  Thickness 11mm)
Spike – Selling at $10/pcs   (Diameter 39mm,  Thickness 26mm) (Come with 3M tape)

Bundle Set A (4x Bases and 4x Spikes) – Selling at $60/set with box  (Save $12)

———————————————————

Black Gorilla 2 – Spikes & Bases

2 spike_a 2 spike_i sticker

Use for medium – big size audio equipment like Amplifier, DAC, Speakers, CD Player, Stand, Hifi rack etc Can support up to 200kg of weight. Stainless Steel and Black Stone Material

Base –  Selling at $9/pcs     (Diameter 49mm,  Thickness 13mm)
Spike – Selling at $14/pcs   (Diameter 49mm,  Thickness 35mm) (Come with 3M tape)

Bundle Set A (4x Bases and 4x Spikes) – Selling at $80/set with box  (Save $12)

——————————————————-

Cone and ball bearing Footers

Ball Bearing Cone

Holds details given is both clear and soft natural. Clear + soft + nature , these three words to describe the use of parallel , points to a lot of people want to reach the realm .

Feedback by user that after try on the pre-amplifier / amplifier the background is more quieter

Material : Aluminum, anodized in silver or black, high-tech ceramic ball, with Screwable (supplied with M8 bolts)

Usable height  30 mm (infinitely adjustable)
Dimensions: Ø 20 mm (top section),
Ø 30 mm ((bottom section)

(Best Performance Load:1x cone can support +- 10kg load, 3x cones support 20-30kg load, 4x cones 20-40kg load and so on….)

Set of 3 –  Selling at $45
Set of 4 – Selling at $60
(currently only available in Black)

———————————————————

Ebony Crystal Footer

Long wanted to have a footer with Crystal as footer as part of my store product. Come across this footer with Ebony and Crystal combination.

Most audiophile will know that Ebony is commonly use in hifi setup for sound improvement especially use as a footer. Even a single pcs of RAW ebony, placing at different area/angle of your system will sound differently. Some people call it 神木。 Like wise the crystal are use in this purpose. How good the sound is? Well to me i always on the neutral side. This is subjective and everyone taste is different. But the Ebony Crystal footer has good feedback from the mainland buyers

Product Description:
Are Ebony and Crystal a perfect combination?
Crystal has transparent clear  and high-frequency with smooth silky sounding, while the ebony has thick and firm natural “wood flavor” feel.  In addition, the excellent sound stage separation has made the ebony crystal a perfect combination!
Ebony Crystal footer use the free rolling crystal ball concept that allow equipment have the kinetic energy consumption absorb the vibration, which greatly enhance the shock absorbed efficiency. Pretty similar to what the FE did. The use of high purity Brazilian crystal ball not only will achieve a better high and yet will not be harsh

Strongly recommended with CD player, turntable, LP, DAC, Amplifiers, Pre-Amp  and other source!

Max weight for 3 pcs – up 80kg
Dimension – Diameter 43mm, Height 25mm

Bundle Set A (3 pcs set) – Selling at $50/set
Bundle Set B (4 pcs set) – Selling at $65/set

———————————————————

Wooden cones

For use in items small – medium size speakers / DACs / amplifiers etc to improve the sound quality. High Flexibility, beside can be use as standalone cone, it can be use as a base for spike.

Size: 33mm diameter
Supported weight : Up to 100KG
Material: Ebony (Black) / Rosewood (Brown)

Set of 4 – Selling at $32

———————————————————

S1 vibration-proof cones for speaker/audio equipment

S1_1S1_4

For use in small size items small speakers / small DACs / small amplifiers etc to improve the sound quality

Size: 24mm * 25mm
Material: Alloy
Package: 3pcs in a box

Selling at $33/box

—————————————————————————–

B1 vibration-proof cones for speaker/audio equipments

B2 B3

Larger base for use in  bigger speakers / DACs / amplifiers etc to improve the sound quality

Size: 28mm * 60mm
Material: Alloy
Package: 3pcs in a box

Selling at $45/box

————————————————————————————————–

Suspension Footers

UFO Float

UFO floating shell  component material is a high performance anti-vibration metal – magnesium alloy .  UFO float is up to 77mm in diameter can give a better stability

Sense of hearing this vibration characteristics of magnesium alloys has no metallic sound , and low-frequency is very good , with thick treble.

The vibration of the structure, using elastic suspension floating leisurely way , this way can eliminate vibrations even more thorough clean, so that portray the sound field is more delicate , more smooth contour. The sound field structured, precise positioning, three-dimensional sound image up ; The overall effect is very well balanced and what we said has upgrade the sound to another level !

They come with standard flat head and 1 spike head. For convenient to use in any setup

Load capacity: 15 kg (set of 3),  20 kg (set of 4).

Set of 3 –  Selling at $105
Set of 4 – Selling at $140

———————————————————

Magfooters – Magnetic footer

Magfooter using of magnetic polarity to give the equipment a floating feel so as to eliminate the vibration and it make the sound more perfect. Comparing to some branded magnetic footers (eg Yamamoto, Alto Extremo) which usually comes with high price. Magfooters here can be an alternative to players who want to own magnetic footers without have to burn a big hole in the pocket. The magnetic feet used anti-skip design and will not move if the equipment vibrate. It is capable to adjustable height high and low to flexiablity let you adjust the balance of the equipment which usually have different position of central weight.

Product Features:
1) Material: Aluminum + magnetic.
2) Come with 2 set of ball for different taste(A 304 tungsten ball+ Brass ball)
3) Surface went through anodizing Treatment
4) Can use on pre-amp DAC, turntables, speakers, CD player and so on.
5) Maximum load weight (Each footer weight est 0.4kg +)
– Small Magfooter (Size Dx 48mm  Hx 50mm) a set of four maximum load weight up to 18KG.
– Big Magfooter (Size Dx 53mm  Hx 58mm) a set of four maximum load weight up to 40KG.

Leave Your Comment

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s